The KETRON-PEEK family of materials is based on polyetheretherketone resin. This semi-crystalline advanced material exhibits a unique combination of high mechanical properties, temperature resistance and excellent chemical resistance, making it most popular advanced plastics material.
*)Very high max. allowable service temperature in air (250*C continuously, up to 310*C for short periods)
*)High mechanical strength, stiffness and creep resistance, also at elevated temperatures
*)Excellent chemical and hydrolysis resistance
*)Excellent wear and frictional behavior (particularly KETRON PEEK - HPV and PEEK-CA30)
*)Very good dimensional stability
*)Inherent low flammability and very low levels of smoke evolution during combustion
*)Good electrical insulating and dielectric properties (except for KETRON PEEK - HPV and PEEK-CA30)
*)Excellent resistance against high energy radiation
OTHER GRADES AVAILABLE IN THIS RANGE:-
KETRON PEEK-1000 : Stock Shapes are produce from virgin polyetheretherketone resin & offers highest toughness & impact strength of all KETRON PEEK grades.
(Natural brownish gray) / black
KETRON PEEK - HPV : The addition of carbon fibres, PTFE & graphite to virgin PEEK results in a KETRON PEEK "Bearing Grade" having low friction, long wear & high Pressure-Velocity capabilities make this grade suited for bearing & wear applications.
(PEEK + CF + PTFE + graphite)
KETRON PEEK - GF30 : This 30% glass fibre reinforced grade offers higher stiffness & keep resistance than PEEK-1000 has much better dimensional stability. Recommended for structural parts carrying high static load for period for elevated temp.
KETRON PEEK - CA30 : This 30% carbon fibre reinforced grade combines even higher stiffness, mechanical strength & creep resistance than KETRON PEEK-GF30, Carbon fibre provide 3.5 times higher thermal conductivity than virgin PEEK.
Shapes available : RODS- : KETRON PEEK - 1000 / HPV / GF-30 / CA-30
PLATES : KETRON PEEK - 1000 / HPV / GF-30 / CA-30TUBES : KETRON PEEK - 1000 / HPV / GF-30 / CA-30
PVDF 1000 is a highly crystalline unreinforced fluoropolymer combing good mechanical, thermal and electrical properties with excellent chemical resistance. Its property profile makes PVDF 1000 a versatile engg. material, specially suitable for the manufacture components for the petrochemical, chemical, metallurgical, pharmaceutical, food, paper, textile and nuclear industries.
*)High max. allowable service temp. in air(150* C continuously)
*)Good mechanical strength, stiffness and creep resistance (better than other fluoropolymer.)
*)Excellent chemical and hydrolysis resistance.
*)High tuffness, also at low temp.
*)Good sliding properties and wear resistance
*)Good dimensional stability
*)Physiologically inert (suitable for food contact)
*)Good electrical insulating properties
*)Outstanding UV- and weather resistance
*)Inherent low flammability
*)Good resistance against high energy radiation (much better than other fluoropolymer)
Shapes available : RODS- : SYMALIT PVDF 1000 natural
PLATES : SYMALIT PVDF 1000 natural
Rated by 4 Users